Kamis, 03 Maret 2011

How to Reset Canon IP2770 Eror 5200

Early indications
If you turn on the ip 2770, printer looks normal with GREEN LED flame. But after ordered to print, then the 5200 error will appear, and the LED will blink alternately. 1 time green orange
8 times ...






Here's How to Reset Canon IP2770 Error 5200:
1. The printer is off and plugged the power cord.
2. Press the RESUME button two seconds
then press the POWER button until the green light flame (when pressing POWER button, Resume button ... do not let go)
3. Then release the Resume button, but do not release the button POWER.
4. POWER button while still depressed, press the Resume button 5 times. Led will flash alternately orange glow green with orange last. (do not get mistaken 4 times because the printer will die completely, but it is temporary as well) Then ...
5. Release both buttons simultaneously.
6. Led will blink briefly then will glow GREEN.
7. And the computer will detect new hardware, ignore it ...
8. Press the POWER button, then the printer will die.
9. Press the POWER button again and then the printer will flame ... PRINTER iP2770 is ready to use.


Other Ways Reset Canon iP2770 error 5200:
1. Turn on the printer and the printer will look normal.
2. Run a printer for printing a document or a print test, then the 5200 error will appear.
3. Directly unplug the power cord without pressing the button on-off
4. Open and slide into the middle of its cartridges manually (press the lock latch in the back of the head white color, so cartridge can be pulled into the middle)
5. Unplug all the cartridges and leave the lid open
6. Turn on the printer, hit the head will move left and right because the lid is still open and will stop in the middle.
7. Reinstall the cartridge, and close the right
8. The printer will return to normal.