How to reset printer canon mp258

Indications Of Damage Are:

 
Type the printer is turned on will show Error Code E8 or E27.
1. Turn off the printer (make sure the power cord still attached), press and hold the STOP / RESET, then press and hold the ON / OFF and release the STOP / RESET (ON / OFF button should not be removed, then press the STOP / RESET 2 times

2. Release both buttons simultaneously, and now printer in SERVICE MODE position (on the printer LCD will show the number "0")

3. After the lights on / off the green and the LCD lights up the numbers 0, please press the STOP / RESET in accordance with the following instructions:

press 1 time = Orange flame lights> for Service pattern testprint
press 2 times = light green flame> for EEPROM testprint
press 3 times = Orange flame lights> for EEPROM reset
press 4 times = Light Green Flame> for the Waste ink counter reset

If the Canon MP145, MP150, and MP160 the error E27, then choose 4x press the STOP / RESET.

4. Press the ON / OFF 2 or 3 times, then the printer will die, and unplug the POWER.

5. Replace the Power Cable and Turn on your printer back on. good luck